ar5425d3270ts

Remove/install light switch module

Tip ar · temă 54.25 · versiune 0100 · 2018-05-02

Valabil pentru: Model 907, 910

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.25 Comutator — Seria 907 · Seria 910

EinPAS 30 Instalaţie de iluminat › 30.15 Sistem de iluminare exterior › 30.15.12 Senzor/Comutator/Cablaj — Seria 907 · Seria 910

AR54.25-D-3270TS

Remove/install light switch module

20.12.2017

Model

907, 910

Remove/install light switch module

1

Light switch module

4

Electrical connector

D54.25-1130-11

Remove/install light switch module

D54.25-1126-09

Shown with code B25 (electric parking brake)

1

Light switch module

3

Retaining tabs

2

Cover

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Release trim (2) with attached electric lines far enough from the instrument panel to gain access to the retaining tabs (3) and the electrical connector (4) of the light switch module (1)

AR68.10-D-1501TS

2

Disconnect electrical connection (4)

3

Release light switch module (1) at retaining tabs (3) and remove towards rear from trim (2)

4

Install in the reverse order

Check

5

Perform function test of all control elements of light switch module (1)

Documente menționate