1 | Gateway for powertrain control unit |
2 | Expansion rivets |
3 | Cover |
4 | Expansion rivet |
S54.21-A032-76
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Connect diagnostic system and commission powertrain gateway control unit (1). | If the powertrain control unit gateway (1) is replaced. | |
| |||
2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
3 | Release front passenger seat and tilt backward with connected electric lines. | ||
4 | Unclip electrical wiring harness (arrow A). | Clip remover | |
5 | Unclip expansion rivets (2). | Clip remover | |
6 | Remove cover (3). | ||
7 | Disconnect electrical connectors from powertrain gateway control unit (1). | ||
8 | Unclip expansion rivets (4). | Clip remover | |
9 | Release powertrain gateway control unit (1) at side and remove. | ||
10 | Install in the reverse order. |
452 589 01 63 00
Clip remover
Documente menționate
- ad0000s200006p
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ah6800n000101s Indicaţii pentru efectuarea operaţiilor de reparare în interiorul autovehiculului
- ar9110s1000p