1
| Run short programming procedure
| Perform minor teach-in process on control unit
| AR54.21-B-0007-01F
|
|
|
| The short programming procedure must be performed:
- if the transmission has been replaced (same transmission type) or repaired.
- if gear group sensor (SGE) (12B04), gear sensor (SGG) (12B03) or clutch travel sensor (12B05) is replaced.
- after changing the clutch.
- after purging (bleeding) the clutch.
- after changing the transmission hydraulic actuator.
|
|
2
| Run long programming procedure
| Perform major teach-in process on control unit
| AR54.21-B-0007-02F
|
|
|
| The long programming procedure must be performed if:
- the gear control unit (AGS) is replaced.
- another type of transmission has been installed (for example, transmission G 85 instead of G 60).
- another type of engine (changed power) is installed.
- the engine is replaced.
|
|
3
| Perform clutch adjustment in the gear automatic control unit (AGS)
| The clutch adjustment is driven by Star Diagnosis menus and listed in the "gear automatic control unit" (AGS)", "Adjustments to the control units" and "Programming procedures".
|
|