ar5418s0001e

Remove/install energy chain for sliding door

Tip ar · temă 54.18 · versiune 0101 · 2016-12-24

Valabil pentru: Model 447.7/8, 448.8 with code SH8 (Windowbags for driver, front passenger and rear) Model 447.7/8, 448.8 with code T55 (Electric operation of sliding door on right) Model 447.7/8, 448.8 with code T56 (Electric operation of sliding door on left) Model 447.8, 448.8 with code E65 (Burmester surround sound system) Model 447.8, 448.8 with code LC1 (ambient lighting)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.18 Cablaje — Seria 447 (modele 7**, 8**) · Seria 448 (modele 8**)

EinPAS 25 Rețea de bord/Rețea/Multi-funcție › 25.25 Cablaj principal › 25.25.28 Cablaj uşă — Seria 447 (modele 7**, 8**) · Seria 448 (modele 8**)

AR54.18-S-0001E

Remove/install energy chain for sliding door

13.12.2016

Model

447.7/8, 448.8

with code SH8 (Windowbags for driver, front passenger and rear)

Model

447.7/8, 448.8

with code T55 (Electric operation of sliding door on right)

Model

447.7/8, 448.8

with code T56 (Electric operation of sliding door on left)

Model

447.8, 448.8

with code E65 (Burmester surround sound system)

Model

447.8, 448.8

with code LC1 (ambient lighting)

Remove/install energy chain for sliding door

S72.16-4613-08

Shown on MODEL 447.8 with code T55 (Electrical actuation for right sliding door)

1

Bolts

3

Electrical connectors

5

Carrier

2

Step platform

4

Bolts

Remove/install energy chain for sliding door

S54.18-4563-09

Shown on MODEL 447.8 with code T55 (Electrical actuation for right sliding door)

6

Electrical connector

9

Electrical connector

12

Energy chain

7

Electrical connectors

10

Electrical connectors

8

Electrical connector

11

Electrical wiring harness

Remove/install energy chain for sliding door

S54.18-4564-09

Shown on removed right sliding door

5

Carrier

12

Energy chain

13

Rivet

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1.1

Remove fuse 74 on left electric sliding door

Model 447.7/8, 448.8
with code T56 (Electric operation of sliding door on left)

Assignment of right footwell firewall fuse and relay module

GF54.15-S-1256-39TRA

1.2

Remove fuse 311 on right electric sliding door

Model 447.7/8, 448.8
with code T55 (Electric operation of sliding door on right)

Assignment of fuse and relay module, right A-pillar

GF54.15-S-1256-38TRA

2

Remove door sill from left or right sliding door

AR68.30-S-1312E

3

Unscrew screws/bolts (1) and remove running board (2)

AR88.30-S-2400E

4

Release bracket of electrical connectors (3) from body

5

Detach electrical connections (3)

The number of electrical connections (3) varies depending on equipment installed.

6

Remove screws (4)

7

Move carrier (5) in direction of arrow and remove in upward direction

8

Remove sliding door panel

AR72.16-S-6610E

9

Take off door foil

10

Disconnect electrical connectors (6, 9)

11

Disconnect electrical connections (7)

12

Disconnect electrical connection (8)

13

Disconnect Electrical connections (10)

14

Remove electrical wiring harness (11) from sliding door

15

Move sliding door to corresponding position and drill out rivet (13) using angular drill

The rear rivet (13) is accessible if the sliding door is in the area between the rear wheel and the wheel arch.

Installation: Install rivets (13) using a commercially available hand riveter.

16

Remove energy chain (12)

17

Detach carrier (5) from energy chain (12)

If carrier (5) or energy chain (12) is replaced.

18

Install in the reverse order

Check

19

Perform function check of all electrical components in repair area

Documente menționate