ar5410p0005tx

Remove/install battery

Tip ar · temă 54.10 · versiune 0105 · 2020-01-30

Valabil pentru: Model 219.3

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.10 Acumulator, alimentare cu tensiune, transformator de tensiune — Seria 219 (modele 3**)

EinPAS 25 Rețea de bord/Rețea/Multi-funcție › 25.20 Reţea de bord › 25.20.20 Acumulator — Seria 219 (modele 3**)

AR54.10-P-0005TX

Remove/install battery

20.01.2020

Model

219.3

Remove/install battery

P54.10-2472-07

Shown on vehicle up to 31.5.06

1

Ground cable

4

Positive line

7

Bracket

2

Positive terminal cover

5

Vent hose

8

Retaining strap

3

Nut

6

Screw

G1

Battery

Remove/install

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

1

Disconnect ground line (1) from battery (G1)

AR54.10-P-0003TX

2

Remove cover from positive terminal (2)

3

Release nut (3) and remove positive line (4) from battery (G1)

Installation:
Check positive line (4) is seated securely,
otherwise the positive pole may be damaged.

4

Detach vent hose (5)

5

Remove screw/bolt (6) and remove bracket (7)

6

Release retaining strap (8) and remove battery (G1) from trunk

7

Install in the reverse order

Documente menționate