S49.20-0012-79
1 | Electrical connector | 4 | Electrical line | 7 | Clip | ||
2 | Electrical line | 5 | Clip | 8 | Nuts | ||
3 | Electrical connector | 6 | Diesel particulate filter |
6 | Diesel particulate filter |
7 | Clip |
9 | Temperature sensor upstream of catalytic converter |
10 | Temperature sensor upstream of diesel particulate filter |
11 | Pressure lines |
12 | Bracket |
S49.20-0013-82
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on self-locking nuts and bolts | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
| Remove/install | ||
1 | Remove pressure hoses from the pressure lines (11). | ||
2 | Disconnect electrical connector (1). | ||
3 | Expose electrical line (2). | ||
4 | Disconnect electrical connector (3). | ||
5 | Expose electrical line (4). | ||
6 | Remove clamp (5). | Installation: Replace clamp (5) and seal. | |
Clamp, diesel particulate filter to exhaust pipe downstream of exhaust gas turbocharger | |||
7 | Remove NOx sensor upstream of the SCR catalytic converter from diesel particulate filter (6). |
| |
8 | Remove clamp (7). | Installation: Replace clamp (7). | |
Clamp, diesel particulate filter to exhaust system center | |||
9 | Remove the rear engine support. | ||
10 | Remove nuts (8) and remove diesel particulate filter (6) downward. | Aid of helper required. | |
Nut, diesel particulate filter bracket to crossmember of front axle | |||
11 | Modify temperature sensor upstream of catalytic converter (9). | When installing new diesel particulate filter (6). | |
Union nut, temperature sensor upstream of catalytic converter to diesel particulate filter | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
12 | Modify temperature sensor upstream of diesel particulate filter (10). | When installing new diesel particulate filter (6). | |
Temperature sensor upstream of diesel particulate filter to diesel particulate filter | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
13 | Modify pressure lines (11). | When installing new diesel particulate filter (6). | |
Nut, holder for pressure line to diesel particulate filter | |||
Union nut, pressure line to diesel particulate filter | |||
Box wrench bit | |||
14 | Modify the bracket (12). | When installing new diesel particulate filter (6). | |
Nut, diesel particulate filter bracket to diesel particulate filter | |||
| Clean | ||
15 | Remove combustion and corrosion residue at connecting points. | ||
16 | Plug openings. | Set of protective caps | |
17 | Install in the reverse order. | ||
18 | Read out and delete fault memory. | ||
| |||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
19 | Perform engine test run and check exhaust system in terms of leak tightness. | Visual inspection only. |
000 589 69 03 00
Box wrench bit
001 589 02 91 00
Set of protective caps
Documente menționate
- ad0000s200006p
- ah0000n000101a Indicaţii pentru şuruburile şi piuliţele autoblocante
- ah0000p001501cw Indicaţie pentru calcularea cuplului de strângere la utilizarea de scule introduse cu diverse lungimi utile
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ar0704s0025ps
- ar2210s4360pd
- ar4920s2063ps
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.