D49.10-1172-09
1 | Rear muffler | 4 | Spring washer | 6 | Elastomer bearing | ||
2 | Soot particulate sensor downstream of SCR catalytic converter | 5 | Elastomer bearing | 7 | Elastomer bearing | ||
3 | Screw clamp |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Remove underbody paneling. |
| |
Installation: Install underfloor paneling only after the leak test. | |||
3 | Remove soot particulate sensor downstream of SCR catalytic converter (2) from rear muffler (1). | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Do not disconnect electrical connector. | |||
Installation: Apply heat-resistant lubricating paste to thread of soot particulate sensor downstream of SCR catalytic converter (2). | |||
Soot particulate sensor to SCR catalytic converter/rear muffler | |||
Paste, hot lubrication 1 kg, DBL 6879.20 | |||
Box wrench bit | |||
4 | Release screw clamp (3). | Installation: Install new screw clamp (3). | |
Clamp, rear muffler to diesel particulate filter | |||
5 | Remove spring washer (4). | Installation: Check spring washer (4). | |
If spring washer (4) is damaged, | |||
| |||
replace damaged spring washer (4). | |||
6 | Remove rear muffler (1). | To do this, press rear muffler (1) out of elastomer bearings (5, 6, 7) toward the rear. | |
| Check | ||
7 | Check elastomer bearings (5, 6, 7) for wear and damage. | If damage and/or wear is present, | |
| |||
replace affected elastomer bearings (5, 6, 7). | |||
8 | Install in the reverse order. | ||
| Check | ||
9 | Check installation position and for unobstructed movement of rear muffler (1). | If installation position of rear muffler (1) is incorrect and/or unobstructed movement not OK, | |
| |||
Correct installation position of the rear muffler (1). | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Check exhaust system for leaks with the engine running. | Visual inspection only. |
000 589 71 03 00
Box wrench bit
Documente menționate
- ah0000p001501cw Indicaţie pentru calcularea cuplului de strângere la utilizarea de scule introduse cu diverse lungimi utile
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah0060n010001ts Indicaţii pentru ridicare şi aşezarea pe cric
- ar0060d100004ts
- ar6130d1001ts
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001001a Pericol de moarte prin alunecare sau basculare a autovehiculului de pe elevator
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.