ar4640t020001b

Press off, refit track rod on track arm

Tip ar · temă 46.40 · versiune 0103 · 2006-07-26

Valabil pentru: MODEL NMB613.355 /358 /388 /455 /485 with STEERING 765.860 MODEL NMB613.364 /365 Lenkung ZF 8098 MODEL NMB613.358 /388 with STEERING 766.376

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 46 Direcţie › 46.40 Bară direcţie — Seria 613 (modele 355, 358, 364, 365, 388, 455, 485)

EinPAS 22 Direcţie › 22.15 Servodirecţie › 22.15.43 Levier de direcție/Bieletă de direcție/Bară de direcție/Amortizor — Seria 613 (modele 355, 358, 364, 365, 388, 455, 485)

Valabil și pentru motoare/cutii de viteze: 765 860, 766 376

AR46.40-T-0200-01B

Press off, refit track rod on track arm

Track rod

Number

Designation

Steering 765.860

Steering 766.376

BA46.40-N-1001-01B

Castellated nut, tie rod to lever

Nm

285

265

Press off, refit track rod on track arm

Torque wrench

000 589 10 99 01

Commercially available tools

Number

Designation

WH58.30-Z-1022-17A

Press for removing ball joints

Press off, refit track rod on track arm

T46.40-0011-01

Detaching

1 Remove the split pin in the castellated nut.

2 Loosen castle nut and unscrew until it is flush with the end of the thread of the tie rod end.

3 Pry the tie rod end off the track lever using the press out tool.

4 Unscrew the castellated nut.

Shown on model 613.355/455/485

Attaching

5 Hang the track rod on the track arm.

6 Screw on the castle nut and tighten to the specified torque .

7 Install the locking cotter pin of the castle nut.

Use a new cotter pin.