ar4640p020002tx

Pressing out and attaching track rod joint at steering knuckle

Tip ar · temă 46.40 · versiune 0200 · 2010-06-16

Valabil pentru: MODEL 219

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 46 Direcţie › 46.40 Bară direcţie — Seria 219

EinPAS 22 Direcţie › 22.15 Servodirecţie › 22.15.43 Levier de direcție/Bieletă de direcție/Bară de direcție/Amortizor — Seria 219

AR46.40-P-0200-02TX

Pressing out and attaching track rod joint at steering knuckle

Modification notes

15.6.10

Value modified: Self-locking nut, tie rod to steering knuckle, Stage 2

*BA46.40-P-1001-01E

Tie rod

Number

Designation

Model
219

BA46.40-P-1001-01E

Self-locking nut, tie rod to steering knuckle

Stage 1

Nm

50

Stage 2

°

90

Pressing out and attaching track rod joint at steering knuckle
Pressing out and attaching track rod joint at steering knuckle

140 589 00 33 00

Puller

Thrust piece

140 589 00 63 00

Pressing out and attaching track rod joint at steering knuckle

P46.40-2001-01

Pushing off

1 Undo self-locking nut of tie rod joint (10a).

2 Mount thrust piece (045).

3 Pry off tie rod joint (10a) using puller (044).

Do not damage the rubber boot, otherwise lubricant will be discharged from the tie rod joint (10a). This results in increased wear.

4 Remove puller (044) and thrust piece (045).

Attaching

5 Clean tapered connection.

There must not be any grease or oil on the cone or thread, otherwise the tie rod joint (10a) could work loose.

6 Replace self-locking nut and tighten. If necessary, counterhold ball head using an Allen wrench.