ar4630p0500cox

Remove/install power steering pump

Tip ar · temă 46.30 · versiune 0100 · 2009-04-02

Valabil pentru: MODEL 204 with ENGINE 651 With electrohydraulic power steering (EHPS)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 46 Direcţie › 46.30 Pompă de servodirecţie — Seria 204 · Seria 651

EinPAS 22 Direcţie › 22.15 Servodirecţie › 22.15.31 Pompă servodirecţie/Rezervor ulei/Filtru — Seria 204 · Seria 651

AR46.30-P-0500COX

Remove/install power steering pump

25.3.09

MODEL 204 with ENGINE 651
With electrohydraulic power steering (EHPS)

Remove/install power steering pump

P46.30-2289-06

1 Connector

2a High pressure line

2b High pressure line

3 Bracket

4 Bolts

5 Shaped hose

6 Power steering expansion reservoir

A91/1 Electrohydraulic power steering

Remove/install

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Before opening the hydraulic system the area surrounding the separation point should be cleaned thoroughly. Even the smallest dirt particles, introduced into the hydraulic components, can lead to malfunctions and a total failure of the hydraulic system.

Notes on bolted connections with self tapping screws

AH00.00-P-0007-01SF

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove right headlamp unit

AR82.10-P-4730CY

2

Suction off oil from expansion reservoir (6)

*210589007100

3

Detach right front wheel

Remove/install wheels

AP40.10-P-4050CW

4

Remove the front and central sections of the lower engine compartment paneling

AR61.20-P-1105CY

5

Remove right front section of front wheel well panel

6

Separate pressure line (2a) at separation point

See Remove/install hydraulic line of power steering.

AR46.25-P-3015CXX

7

Detach molded hose (5) from electrohydraulic power steering (A91/1)

8

Disconnect plug (1) and unclip electrical feed lines from bracket (3)

Replace cable ties.

9

Unscrew bolts (4) and remove electrohydraulic power steering (A91/1) with bracket (3) and pressure line (2b)

*BA46.30-P-1017-01R

10

Detach pressure line (2b)

When replacing the electrohydraulic power steering (A91/1)

AR46.25-P-3015CXX

11

Install in the reverse order

12

Use STAR DIAGNOSIS to check electrohydraulic power steering (A91/1) for up-to-date flashware, read out fault memory and erase if necessary

When replacing the electrohydraulic power steering (A91/1)

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

13

Test run engine and check that steering system is not leaking and is functioning correctly

Power steering pump

Number

Designation

Model
204 with engine 651

BA46.30-P-1017-01R

Bolt, power steering pump bracket (EHPS [electrohydraulic power steering]) to body

M6

Nm

8

M8

Nm

20

Remove/install power steering pump

Hand pump

210 589 00 71 00

Documente menționate