ar4630d0010f

Fill power steering pump and bleed

Tip ar · temă 46.30 · versiune 0100 · 2013-06-17

Valabil pentru: MODEL 909

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 46 Direcţie › 46.30 Pompă de servodirecţie — Seria 909

EinPAS 22 Direcţie › 22.15 Servodirecţie › 22.15.31 Pompă servodirecţie/Rezervor ulei/Filtru — Seria 909

AR46.30-D-0010F

Fill power steering pump and bleed

28.5.13

MODEL

909

Fill power steering pump and bleed
Fill power steering pump and bleed

1

Cap with dipstick

N46.00-2180-01

N46.00-2179-01

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Fill, bleed

1

Unscrew cap with dipstick (1) from container

Check condition of cap seal, replace if necessary.

2

Fill container with oil

Do not add oil higher than the "max" marking.

Steering gear oil

*BF46.00-N-1001-01A

3

Relieve the load on the front axle

4

Turn steering when the engine is OFF from end stop to end stop while permanently correcting oil level in the container

Continue operation until no more bubbles are formed in the container.

5

Turn steering with the engine at idle speed

Continue operation until no more bubbles are formed in the container.

6

Correct oil level in container

AP46.00-D-4611F

7

Fit cap with dipstick (1) and screw tight

8

Check steering system for leaks

AP00.20-D-0050F

Steering

Number

Designation

MODEL 909

BF46.00-N-1001-01A

Steering gear oil

Filling capacity

Liter

0,8...1,0

Sheet

BB00.40-P-0236-03A

Documente menționate