Remove/install vacuum pump

AR43.05-P-1320A

15.2.12

MODEL 140 with ENGINE 606

MODEL 202 with ENGINE 604, 605

MODEL 210 with ENGINE 602.982, 604, 605, 606

MODEL 460, 461, 463 with ENGINE 602

MODEL 463 with ENGINE 603, 606

P43.05-0201-09

1 Fan shroud

2 Viscous fan clutch

5 Gasket

6 Vacuum line

3 Poly-V-belt

4 Vacuum pump

 	Remove/install
1.1	Remove fan shroud (1)	 Model 461 with engine 602.983	AR20.40-P-6800GV
2.1	Remove viscous fan clutch (2)	Engine 604	AR20.40-P-5660HA
		Engine 605, 606	AR20.40-P-5660HB
		Engine 602, 603 in model 461, 463	ra20006030312x
		Engine 602 in model 460	ra2051m600501z
3	Slacken poly V-belt (3) and swivel tensioner pulley to the side		AR13.22-P-1202HA
4	Unbolt vacuum line (6)
5	Unbolt vacuum pump (4)	 Installation: Replace gasket in order prevent leaks.  For piston pump: Turn crankshaft in direction of engine rotation until the actuating cams are positioned on the injection timing device so that the drive roller of the vacuum pump engages between the cams. For vane-type pump (Barluk): Note position of driver.
		 Model 140, 202, 210	*BA43.05-P-1001-01A
		 Models 202, 210:	*BA43.05-P-1001-01D
		 Model 460, 461, 463	*BA43.05-P-1001-01B
6	Install in the reverse order

 Vacuum pump

Number	Designation		Model 140


BA43.05-P-1001-01A	Bolt, vacuum pump to cylinder head	Nm	10

 Vacuum pump

Number	Designation		Model 460	Model 461, 463


BA43.05-P-1001-01B	Bolt, vacuum pump to timing case cover	Nm	10	10

 Electric vacuum pump of brake booster

Number	Designation		Model 202	Model 210


BA43.05-P-1001-01D	Bolt, vacuum pump to cylinder head	Nm	14	14