Remove/install ABS measuring ring

Tip ar · temă 42.30 · versiune 0101 · 2005-07-12

Valabil pentru: MODEL 613.355 with FRONT AXLE 739.234 with REAR AXLE 745.990 MODEL 613.355 /455 /485 with FRONT AXLE 739.234 with REAR AXLE 745.996 MODEL 613.355 /358 /388 with FRONT AXLE 739.234 with REAR AXLE 745.997

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 42 Sistem hidraulic frâne şi sistem mecanic › 42.30 Sistem antiblocare (ABS) — Seria 613 (modele 355, 358, 388, 455, 485)

EinPAS 26 Sisteme active de siguranţă › 26.20 Reglare frânare/Reglare tracţiune › 26.20.12 Senzor/Comutator/Cablaj — Seria 613 (modele 355, 358, 388, 455, 485)

Valabil și pentru motoare/cutii de viteze: 739 234, 745 990, 745 996, 745 997

AR42.30-T-0160B

Remove/install ABS measuring ring

7.2.00

MODEL 613.355 with FRONT AXLE 739.234 with REAR AXLE 745.990

MODEL 613.355 /455 /485 with FRONT AXLE 739.234 with REAR AXLE 745.996

MODEL 613.355 /358 /388 with FRONT AXLE 739.234 with REAR AXLE 745.997

T42.30-0014-01

Illustration of front axle 739.234

 	Remove, Install
1	Remove rear wheel hub		AR35.20-T-0310B
2	Remove front wheel hub		AR33.20-T-0310B
3	Drive ABS measuring ring from wheel hub evenly in the direction of the arrow with a brass punch	Installation: Drive measuring ring evenly onto wheel hub up to the stop with a plastic mallet. For the rear wheel hub, the  drift must be used.	*745589011500
4	Install in the reverse order

Drift punch

745 589 01 15 00

Remove/install ABS measuring ring

Documente menționate