ar4210t0130ba

Check bellows on thrust pieces

Tip ar · temă 42.10 · versiune 0100 · 2005-07-12

Valabil pentru: MODEL NMB613.358 /388 with REAR AXLE 746.217

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 42 Sistem hidraulic frâne şi sistem mecanic › 42.10 Frână de serviciu — Seria 613 (modele 358, 388)

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.15 Frână de serviciu/instalație vacuum › 21.15.40 Frână de serviciu față — Seria 613 (modele 358, 388)

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.15 Frână de serviciu/instalație vacuum › 21.15.42 Frână de serviciu spate — Seria 613 (modele 358, 388)

Valabil și pentru motoare/cutii de viteze: 746 217

AR42.10-T-0130BA

Check bellows on thrust pieces

28.6.04

MODEL NMB613.358 /388 with REAR AXLE 746.217

Check bellows on thrust pieces

W42.10-0010-01

1 Thrust piece

2 Bellows

1

Remove wheel

AR40.10-T-1100B

2

Remove brake pads

AR42.10-T-0170BA

3

Insert new brake pad into outer brake anchor shaft

The brake pad limits the range of adjustment of the thrust pieces (1) and therefore prevents the threaded pipes unscrewing completely, which would mean the brake caliper would have to be replaced.

4

Turn adjuster clockwise until the bellows (2) of the thrust pieces (1) are easily visible.

Use only a box wrench or socket wrench for adjusting.

5

Check bellows (2) and thrust pieces (1)

Notes on evaluating thrust pieces

Model 375, 613, 930, 932, 933, 934, 944, 950, 952, 953, 954, 957, 970, 972, 974, 975, 976 with disk brake

AH42.10-N-9406-08A

If thrust pieces (1) are sluggish or if bellows (2) are damaged:

Install new thrust pieces with bellows.

AR42.10-T-0200BA

6

Install brake pads

AR42.10-T-0170BA

7

Fit wheel

AR40.10-T-1100B

Documente menționate