ar4210p0070rt

Remove/install front axle brake caliper

Tip ar · temă 42.10 · versiune 0103 · 2019-02-18

Valabil pentru: Model 251

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 42 Sistem hidraulic frâne şi sistem mecanic › 42.10 Frână de serviciu — Seria 251

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.15 Frână de serviciu/instalație vacuum › 21.15.40 Frână de serviciu față — Seria 251

AR42.10-P-0070RT

Remove/install front axle brake caliper

12.02.2019

Model

251

Remove/install front axle brake caliper

1

Floating caliper

2

Front brake pad contact sensor

3

Brake hose

4

Bolts

5

Floating caliper support

P42.10-2449-04

Remove/install

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Notes on repairs to brake system

AH42.00-P-0003-01A

1

Lift/jack up vehicle

AR00.60-P-1000RT

2

Remove the front wheels

AP40.10-P-4050RT

3

Remove brake pads from floating brake caliper

AR42.10-P-0160RT

4

Detach brake hose (3) from floating brake caliper (1)

Topical note

Notes on installing brake hoses

AH42.10-P-9406-01A


Seal brake hose (3) immediately with stop plug. The expansion reservoir for brake fluid must not be allowed to run empty,
else air will flow into the brake system.

Brake line to floating brake caliper

*BA42.10-P-1001-14A

Record plug

*129589009100

5

Detach electric feed line of front brake pad contact sensor (2) from floating brake caliper (1)

Notes on installing brake wear indicator contact sensors

AH42.10-P-0003-01GZ

Installation: Replace bolt.

6

Remove floating brake caliper (1)

7

Unscrew screws (4) and remove floating caliper carrier (5)

Installation: Replace screws/bolts (4).

Self-locking bolt, brake caliper support to steering knuckle

*BA42.10-P-1003-10L

8

Install in the reverse order

9

Bleed brake system

AR42.10-P-0010RT

Brake hoses, brake lines

Number

Designation

Model 251

BA42.10-P-1001-14A

Brake line to floating brake caliper

Nm

22

Front axle brake caliper

Number

Designation

Model 251 (except 251.077/177)

Model 251.077/177

BA42.10-P-1003-10L

Self-locking bolt, brake caliper support to steering knuckle

Stage 1

Nm

80

80

Stage 2

°

45

45

Remove/install front axle brake caliper

129 589 00 91 00

Record plug

Documente menționate