Checking braking system for leaks using pressure gauge · ar4210d0015d · Mercedes-Benz WIS

AR42.10-D-0015D

Checking braking system for leaks using pressure gauge

26.1.01

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (J61) Test connection hydraulic brake

MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU7) National version for Canada

MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU9) National version for Mexico

D42.10-0004-05

1 Test connection for uncontrolled brake pressure

2 Front axle brake caliper

3 ALB controller

4 Test connection, brake pressure controlled

5 Rear axle brake caliper

Fig. item, etc.	Notes on the work
Danger!	Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury. Crushing and burn injuries may result while working on engine during when it is being started or when it is in operation.	Secure vehicle to prevent it from moving. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
Danger!	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid.	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on brake fluid	All models	AH42.50-P-0001-01A
	Notes on repairs to brake system	All models	AH42.00-P-0003-01A
	Notes on checking brake system for leaks		AH42.10-N-0001-01A
	Connect test line to master brake cylinder		AR42.10-D-0015-03A
		 Pressure tester	*WH58.30-Z-1004-15A
	Perform low-pressure and high-pressure check on brake system		AR42.10-D-0015-02A
			*000589183100
		Test values for low-pressure check	*BE42.50-N-1001-01A
		Test values for high-pressure check	*BE42.50-N-1002-01A
	Check fluid level in reservoir and correct if necessary		AP42.50-D-4210B

Test values for brake system hydraulics

Number	Designation			Models 690.6, 901, 902, 903, 904, 905	Models WD1/WD2/ WD3/WD6/ WD7/XD1/ XD2/XD3/ XD4/XD5/ XD6/XD7/ YD1/YD2/ YD3/YD4/ YD5/YD6/ YD7


BE42.50-N-1001-01A	Low-pressure check on brake system	Test pressure	bar	2...5	2...5
		Duration of test	min	5	5
		Max. pressure drop	%	-	-
BE42.50-N-1002-01A	High-pressure check on brake system	Test pressure	bar	50...100	50...100
		Duration of test	min	10	10
		Max. pressure drop	%	10	10

000 589 18 31 00

Brake pedal winch

Commercially available tools

Number	Designation
WH58.30-Z-1004-15A	Pressure tester

ah4200p000301a Indicaţii pentru reparaţii efectuate la instalaţia de frânare
ah4210n000101a Indicaţii la verificarea etanşeităţii instalaţiei de frână
ah4250p000101a Indicaţii pentru lichidul de frână
ap4250d4210b
ar4210d001502a Efectuarea verificării presiunii scăzute şi a verificării presiunii înalte la instalaţia de frână
ar4210d001503a Conectarea cablului de verificare la cilindrul de frână principal
as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
as4250z000101a Pericol de intoxicare prin înghiţire de lichid de frână. Pericol de rănire prin contactul pielii şi ochilor cu lichidul de frână