ar4110p010002v

Press grooved ball bearing out of rubber mount of propeller shaft, press in

Tip ar · temă 41.10 · versiune 0103 · 2008-02-26

Valabil pentru: MODEL 171

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 41 Arbore cardanic › 41.10 Arbore cardanic — Seria 171

EinPAS 17 Grup motopropulsor/Punte › 17.40 Arbore cardanic › 17.40.30 Arbore cardanic dispozitiv de antrenare/tracţiune integrală — Seria 171

AR41.10-P-0100-02V

Press grooved ball bearing out of rubber mount of propeller shaft, press in

Press grooved ball bearing out of rubber mount of propeller shaft, press in
Press grooved ball bearing out of rubber mount of propeller shaft, press in

116 589 09 43 00

201 589 09 43 00

Press out/in tool

Press out/in tool

Press grooved ball bearing out of rubber mount of propeller shaft, press in

P41.00-0002-01

Press out

1 Using press out/in tool (04), press grooved ball bearing (8) out of bearing seat lined with rubber (7).

Use 116 589 09 43 00 with grooved ball bearing inside diameter of 30 mm.

Use 201 589 09 43 00 with grooved ball bearing inside diameter of 25 mm.

Press grooved ball bearing out of rubber mount of propeller shaft, press in

P41.00-0003-01

Press in

2 Using press out/in tool, press in grooved ball bearing (8) up to the contact surface (arrows) in bearing seat lined with rubber.

Ensure grooved ball bearing is seated correctly.