ar4030p0452a

Measuring lower wishbone (when removed)

Tip ar · temă 40.30 · versiune 0102 · 1997-04-24

Valabil pentru: MODEL 129 up to 1.10.93, 140

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 40 Roţi, geometria sistemului de rulare › 40.30 Constatare accident — Seria 129 · Seria 140

EinPAS 20 Sistem de rulare › 20.10 Geometria sistemului de rulare › 20.10.20 Diagnoză/Verificare/Măsurare/Reglare — Seria 129 · Seria 140

AR40.30-P-0452A

Measuring lower wishbone (when removed)

20.5.94

MODEL 129 up to 1.10.93,
140

Measuring lower wishbone (when removed)

P40.30-0287-01

Checking

1

Perform visual inspection on wishbone.

Check for corrosion and distortion.

2

Push alignment tool, 14 mm dia. length approx. 430 mm, through wishbone bores in the direction of the arrow.

The alignment tool must be able to be pushed through creating suction.

This measurement method can no longer be used on model 129 as of the production breakpoint of the rubber mount with steel sleeve (10/93) .

Perform visual inspection or comparative check with new part.