ar4030p0450b

Measuring front axle carrier (removed)

Tip ar · temă 40.30 · versiune 0104 · 1997-02-21

Valabil pentru: MODEL 210

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 40 Roţi, geometria sistemului de rulare › 40.30 Constatare accident — Seria 210

EinPAS 20 Sistem de rulare › 20.10 Geometria sistemului de rulare › 20.10.20 Diagnoză/Verificare/Măsurare/Reglare — Seria 210

AR40.30-P-0450B

Measuring front axle carrier (removed)

15.2.95

MODEL 210

Measuring front axle carrier (removed)
Measuring front axle carrier (removed)

P40.30-0309-01

P40.30-0308-01

016a Straightening bench fixtures, rear

017a Straightening bench fixtures, front

Arrows Reference holes

Removing, installing

1

Remove, install front axle

Model 210 except 210.08/28

AR33.10-P-0100B

Models 210.08/28

AR33.10-P-0100D

Measuring

2

Set up Celette straightening bench modular members

See set-up diagram for Celette straightening bench.

3

Insert checking fixtures (see set-up diagram) in the mounting bores of the Celette straightening bench and secure

We recommend measuring the front axle carrier on the vehicle concerned before or after work on the straightening bench.

4

Place front axle carrier assembly (with front axle halves and rubber mounts) or as a single part on the checking fixtures rotated through 180° as illustrated

The adjusting pins of the front axle carrier must be inserted into the reference holes (arrows).

*BE40.30-P-1001-08A

Test values for front axle carrier

Number

Designation

Model 210

BE40.30-P-1001-08A

Maximum distance between the contact surfaces of the front axle carrier and checking fixture

mm

5

Documente menționate