Measuring front wheel carrier (when removed)

AR40.30-P-0450A

Measuring front wheel carrier (when removed)

20.5.94



Removing, installing

1

Remove, install front axle

AR33.10-P-0100A



Measuring

2

Set up Celette straightening bench modular members

3

Install and secure checking fixtures
(016, 017) in the mounting bores of the Celette straightening bench

 The front axle carrier is to be measured on a Celette straightening bench. We recommend carrying out this work before or after straightening bench work on the vehicle concerned.

*140589072300

4

Place front axle carrier complete (with front axle halves and rubber mounts) or as an individual part on the checking fixtures.

*BE40.30-P-1001-08A

5

Check bearing bracket of steering idler arm mount using a shop-made alignment tool.

The alignment tool must align with the right-angled contour of the front axle cross member (arrow).



WF58.50-P-4030-02A

Number

Designation

Model 140

BE40.30-P-1001-08A

Maximum distance between the bearing surfaces of the front axle carrier and checking fixture

mm

5