ar4015s0081p

Remove/install tire pressure sensor

Tip ar · temă 40.15 · versiune 0200 · 2019-07-04

Valabil pentru: Model 470, 471 with code RY2 (Tyre pressure monitoring system)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 40 Roţi, geometria sistemului de rulare › 40.15 Presiune anvelope şi supraveghere — Seria 470 · Seria 471

EinPAS 26 Sisteme active de siguranţă › 26.29 Monitorizare presiune anvelope/Reglare presiune anvelope › 26.29.12 Senzor/Comutator/Cablaj — Seria 470 · Seria 471

AR40.15-S-0081P

Remove/install tire pressure sensor

24.06.2019

Model

470, 471

with code RY2 (Tyre pressure monitoring system)

Modification notes

24.06.2019

Method revised, content updated.

The whole document

Remove/install tire pressure sensor

1

Valve

2

Tire pressure sensor

S40.15-4531-11

Topical note

Information on tires / rims

AH40.10-P-9411-01A

Notes on using tester for tire pressure monitoring systems

AH40.15-P-0001-01A

Remove

1

Detach tire.

AR40.10-S-1030P

2

Remove tire pressure sensor (2).

The tire pressure sensor (2) and valve (1) form a unit and are destroyed during removal.

Install

3

Install new tire pressure sensor (2) with valve (1).


Carefully install tire pressure sensor (2) and do not tilt it.
Damage and malfunctions can otherwise occur.

Assembly tool

*470589011600

4

Mount the tire.

AR40.10-S-1030P

Check

5

Check function of tire pressure loss detection system.

If it is functioning incorrectly

Determine cause and define suitable repair measures.

Remove/install tire pressure sensor

470 589 01 16 00

Assembly tool

Documente menționate