ar3530t045901b

Removing and installing inner race of drive pinion head bearing

Tip ar · temă 35.30 · versiune 0100 · 2005-07-12

Valabil pentru: REAR AXLE 745.990 /996 /997 in MODEL 613

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 613

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.65 Diferențial spate/ax transmisie principală — Seria 613

Valabil și pentru motoare/cutii de viteze: 745 990, 745 996, 745 997

AR35.30-T-0459-01B

Removing and installing inner race of drive pinion head bearing

Danger!

Risk of injury to skin and eyes from handling hot or glowing objects.

Wear protective gloves, protective clothing and, if appropriate, eye protection.

AS00.00-Z-0002-01A

Removing and installing inner race of drive pinion head bearing
Removing and installing inner race of drive pinion head bearing

343 589 03 15 00

Drift

Puller

001 589 19 33 00

Removing and installing inner race of drive pinion head bearing

T35.30-0024-01

Removing

1 Remove circlip from drive pinion.

2 Detach inner race (1) of drive pinion head bearing using puller.

Removing and installing inner race of drive pinion head bearing

T35.30-0025-01

Installing

3 Heat inner race (1) to approx. 80 °C and drive onto drive pinion (2) using drift.

4 Insert circlip into groove on drive pinion (2).

Documente menționate