ar3530s467102p

Carry out concentricity measurement on the drive flange

Tip ar · temă 35.30 · versiune 0101 · 2018-12-11

Valabil pentru: Model 470, 471

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 470 · Seria 471

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.65 Diferențial spate/ax transmisie principală — Seria 470 · Seria 471

AR35.30-S-4671-02P

Carry out concentricity measurement on the drive flange

Model

470, 471

Axle drive

Number

Designation

Model 470, 471

BE35.30-N-1003-07P

Axial runout on drive flange

mm

< 0,08

Carry out concentricity measurement on the drive flange
Carry out concentricity measurement on the drive flange

363 589 02 21 00

Dial indicator holder

001 589 82 21 00

Dial gauge

Carry out concentricity measurement on the drive flange

1

Fasten  dial indicator (1) with  dial indicator holder at vehicle floor.



2

Align dial indicator (1) relative to concentricity measurement on measurement track (3) in 90° angle to drive flange (2).



3

Rotate drive flange (2) slowly at constant speed through 360° and read off measurement value.


If the measurement value is out of tolerance

Replace drive flange (2).



4

Align dial indicator (1) relative to concentricity measurement on measurement track (4) in 90° angle to drive flange (2).



5

Rotate drive flange (2) slowly at constant speed through 360° and read off measurement value.


If the measurement value is out of tolerance

Replace drive flange (2).



6

Remove dial indicator (1) with  dial indicator holder from vehicle floor.


Shown on model 470 with engine 699

S35.30-4516-05