ar3530p011503a

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Tip ar · temă 35.30 · versiune 0108 · 2004-08-19

Valabil pentru: MODEL 129, 140, 202, 210 up to 31.1.96

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 129 · Seria 140 · Seria 202 · Seria 210

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.51 Arbore punte/Arbore de antrenare — Seria 129 · Seria 140 · Seria 202 · Seria 210

AR35.30-P-0115-03A

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Pressing out and drawing in rear axle shaft at rear axle shaft flange

Extraction and installation tool

210 589 03 43 00

Pressing out and drawing in rear axle shaft at rear axle shaft flange

P35.30-0209-01

Removal:

1.1 Cut the thread M8 (models 129, 140, 202 as of 08/93, 210 with core hole bore).

Pressing out and drawing in rear axle shaft at rear axle shaft flange

P35.30-0210-01

2 Use removal and insertion tool to press firmly attached rear axle shaft out of the rear axle shaft flange.

Installation

On rear axle shafts which are glued in before installation clean the splined shaft profile and rear axle shaft flange mechanically.

3 Pull in rear axle shaft using the extraction and insertion tool .