ar3530b481509a

Installing drive pinion with bearing in rear axle housing

Tip ar · temă 35.30 · versiune 0100 · 2016-02-12

Valabil pentru:

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 688 (modele 272, 276, 277)

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.65 Diferențial spate/ax transmisie principală — Seria 688 (modele 272, 276, 277)

Valabil și pentru motoare/cutii de viteze: 743 498

AR35.30-B-4815-09A

Installing drive pinion with bearing in rear axle housing

Installing drive pinion with bearing in rear axle housing

B33.30-0003-01

1 Install some compensating washers in the drive pinion seat inside the case.

Installing drive pinion with bearing in rear axle housing

B33.30-0004-01

2 Install the pinion assembly in its housing with the help of a plastic head hammer

Insert, in the taper roller bearing, the plastic bushing utilized at removal, to prevent bearing damage. The bushing will be expelled when installing the pinion assembly. Strike the assembly until the threaded ring touches the front face of the housing