ar3530b047501xd

Determining installed dimension of differential assembly

Tip ar · temă 35.30 · versiune 0100 · 2016-09-15

Valabil pentru: Rear axle 748.590/594 in model 934.2, 958.4

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 934 (modele 2**) · Seria 958 (modele 4**)

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.65 Diferențial spate/ax transmisie principală — Seria 934 (modele 2**) · Seria 958 (modele 4**)

Valabil și pentru motoare/cutii de viteze: 748 590, 748 594

AR35.30-B-0475-01XD

Determining installed dimension of differential assembly

Rear axle

748.590/594 in model 934.2, 958.4

Determining installed dimension of differential assembly
Determining installed dimension of differential assembly
Determining installed dimension of differential assembly

001 589 53 21 00

Dial gage

055 589 29 21 00

Adjusting device

055 589 02 23 00

Template

Determining installed dimension of differential assembly

1

Install the gauger (3) on the adjusting device (2).


Observe the proper seating of the gauger (3) in the supports (4) of the adjusting device (2).



2

Install the dial indicators (1) on the adjusting device (2) and support the rod dial indicator on the surface of the gauger (3), applying a load of about 2 mm in the pointer (6). Reset the pointer (5) of the dial indicators (1).


B35.31-0076-11