ar3530b045902a

Removing and installing drive pinion head bearing

Tip ar · temă 35.30 · versiune 0100 · 2016-02-12

Valabil pentru:

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 688 (modele 272, 276, 277)

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.65 Diferențial spate/ax transmisie principală — Seria 688 (modele 272, 276, 277)

Valabil și pentru motoare/cutii de viteze: 743 ***, 743 498

AR35.30-B-0459-02A

Removing and installing drive pinion head bearing

Removing and installing drive pinion head bearing

000 589 45 33 00

Puller

Removing and installing drive pinion head bearing

B33.30-0008-02

Remove

1 Remove, from the pinion, the lock-ring of the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0007-02

2 Pull the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0012-01

Installing

The inner race of the roller bearings are to be heated up to 80 °C to enable the assembly on the pinion.

3 Assemble the inner race of the roller bearing on the pinion tip with an appropriate drift.

4 Install the snap-ring.