AR35.20-T-0310C | Removing and installing rear wheel hub | 2.5.00 |
MODEL 613.364 /365
with HOSE rear axle for O560
T35.20-0008-06
1 Wheel hub hexagon nut
2 Serrated bolt
3 Keyed washer
4 Rear wheel hub
5 Wheel carrier
6 Outer tapered roller bearing
7 Inner tapered roller bearing
| Removing, installing | ||
1 | Drain oil from rear wheel hub | ||
| Rear axle oil change | ||
2 | Remove brake drum | ||
3 | Remove rear axle shaft | ||
4 | Unscrew serrated bolt (2) and wheel hub hexagon nut (1) | Installation: Adjust wheel bearing play: | |
Adjust wheel bearing play | |||
5 | Remove keyed washer (3) | ||
6 | Pull rear wheel hub (4) off wheel carrier (5) | Removal: Do not allow the removed rear wheel hub to rest on the still fitted ABS measuring ring. Installation: - Coat all around the fillet radius on the wheel carrier with Plastilube. - To avoid damage to the lip of the radial seal ring, to not tilt the rear wheel hub when pushing it onto the wheel carrier. | |
Danger! | Risk of injury to skin and eyes from handling hot or glowing objects | Wear protective gloves, protective clothing and, if necessary, eye protection. | |
7 | Remove outer tapered roller bearing (6) from rear wheel hub (4) | Installation: After pushing on the rear wheel hub (step 6), heat the outer tapered roller bearing to approx. 60 °C and push onto the wheel carrier. | |
8 | Remove ABS measuring ring from rear wheel hub (4) | Installation: The ABS sensor must lie on the ABS measuring ring. | |
9 | Install in the reverse order |
Commercially available tools
Documente menționate
- ap3500t3501c
- ar3520t0300c
- ar3530t0620c
- ar4210t1010c
- ar4230t0160c
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente