ar3325b040004c

Check end play of steering knuckle and adjust if necessary

Tip ar · temă 33.25 · versiune 0100 · 2016-02-12

Valabil pentru:

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 33 Punte faţă › 33.25 Corp punte, fuzetă — Seria 384 (modele 114, 145)

EinPAS 17 Grup motopropulsor/Punte › 17.50 Punte faţă › 17.50.42 Fuzetă/Butuc roată/Rulment roată — Seria 384 (modele 114, 145)

Valabil și pentru motoare/cutii de viteze: 733 ***

AR33.25-B-0400-04C

Check end play of steering knuckle and adjust if necessary

Steering knuckle

Número

Denominação

Front axle 733.002/009/033/036

BE33.25-B-1003-01C

Axial play of the axle's knuckle at the beam's wrist

mm

-

Washers' thickness

mm

3,7..4,9

The joint housing should be adjusted without end play. Use a compensating washer with the proper thickness to make the adjustment.

Check end play of steering knuckle and adjust if necessary

B33.25-0084-01

Check the thickness of the compensating washer

1 Lift the joint housing and support it so that the kingpin and the thrust bearing rest against the bushing collar without end play.

Check end play of steering knuckle and adjust if necessary

B33.25-0075-01

2 Measure the distance "A" between the face of the joint housing and the seating face of the upper kingpin on the support tube.

Check end play of steering knuckle and adjust if necessary

B33.25-0076-01

3 Mount the bushing in the upper kingpin and measure the distance "B" between the mating surface of the kingpin and the top of the bushing.
The difference between the measure "A" and the measure "B" is the thickness of the compensating washer to be installed.