ar3325b040004a

Check end play of steering knuckle and adjust if necessary

Tip ar · temă 33.25 · versiune 0103 · 2016-02-12

Valabil pentru:

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 33 Punte faţă › 33.25 Corp punte, fuzetă — Seria 688 (modele 101, 102, 103, 111, 118, 121, 123, 133, 143, 156, 157, 158, 159, 174, 176, 177, 187, 232, 244, 254, 255, 270, 272, 276, 277)

EinPAS 17 Grup motopropulsor/Punte › 17.50 Punte faţă › 17.50.42 Fuzetă/Butuc roată/Rulment roată — Seria 688 (modele 101, 102, 103, 111, 118, 121, 123, 133, 143, 156, 157, 158, 159, 174, 176, 177, 187, 232, 244, 254, 255, 270, 272, 276, 277)

Valabil și pentru motoare/cutii de viteze: 732 ***, 733 ***

AR33.25-B-0400-04A

Check end play of steering knuckle and adjust if necessary

Steering knuckle

Número

Denominação

Front axle 732.510

Front axle 733.840/880, 733.882

BE33.25-B-1003-01A

Axial play and compensating washers

Beam handle

mm

0.01...0.15

0.01...0.15

Washers thickness

mm

0.5...1.6

0.7...1.9

Check end play of steering knuckle and adjust if necessary
Check end play of steering knuckle and adjust if necessary

001 589 53 21 00

Dial indicator

363 589 02 21 00

Dial gauge holder

Check end play of steering knuckle and adjust if necessary

N33.25-2003-01

1 With the dial gauge, check the axial play between the axle beam's fist and the stub.

If the maximum permissible play is exceeded, determine the compensation washer (1).

Check end play of steering knuckle and adjust if necessary

B33.25-0057-01

2 Install the corresponding compensation washer (1).

The compensation washers (1) are available in thicknessfrom 0.7 to 1.9 mm. The thickness increase of compensation washers (1) is 0.1 mm.
Axle 732.510 washers from 0.6 to 1.6 mm