Replace supporting joint · ar3320p0440b · Mercedes-Benz WIS

AR33.20-P-0440B

Replace supporting joint

12.11.09

MODEL 170

MODEL 202

MODEL 208

MODEL 210 (except 210.08 /28)

P33.20-0260-01

P33.20-0218-01

P33.20-0216-01

Modification notes

30.7.95

Technical modification: Supporting joint with integrated rebound stop

Step 5

 	Remove/install
	To remove and install the supporting joint the shock absorber must be installed.
1	Remove front wheel		AP40.10-P-4050Z
2	Unscrew nuts from supporting joint	 Install new self-locking nut.	*BA33.20-P-1006-01A
3	Screw thrust piece (044a) onto the respective ball stud of the supporting joint		*140589006300
4	Press out supporting joint using puller (044) from steering knuckle or transverse control arm	 Clean conical joint.	*202589023300
5	Check supporting joint	Replace if necessary	AR33.20-P-0425A
		 Installation: After installing new supporting joint, apply an approved EP filler to protect it against corrosion.
	Supporting joint with integrated rebound stop	Model 202	BT33.20-P-0002-01A
6	Install in the reverse order

 Wheel location, hub

Number	Designation		Model 170	Model 202	Model 208


BA33.20-P-1006-01A	Self-locking nut, supporting joint to lower transverse control arm	Nm	105	105	105

 Wheel location, hub

Number	Designation		Model 210 except 210.08/28


BA33.20-P-1006-01A	Self-locking nut, supporting joint to lower transverse control arm	Nm	105

140 589 00 63 00

202 589 02 33 00

Puller

Thrust piece

ap4010p4050z Demontarea, montarea roţilor, în caz de nevoie, schimbarea poziţiei
ar3320p0425a Verificaţi suportul de articulaţie şi elementul de ghidaj a poziţiei fuzetei (demontate)
bt3320p000201a