ar3235p2050bd
Remove/install front stabilizer bar
Tip ar · temă 32.35 · versiune 0207 · 2020-01-23
Valabil pentru: Model 461 Model 463 (except 463.234) up to model year 2013
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 2 Sistem de rulare › 32 Suspensie › 32.35 Bară stabilizatoare — Seria 461 · Seria 463 (modele 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 270, 271, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
EinPAS 17 Grup motopropulsor/Punte › 17.50 Punte faţă › 17.50.41 Braț transversal/Braț/Bară stabilizatoare — Seria 461 · Seria 463 (modele 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 270, 271, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
AR32.35-P-2050BD
| Remove/install front stabilizer bar
| 19.12.2019
|
Model
| 461
|
Model
| 463 (except 463.234)
|
|
| up to model year 2013
|
18.12.2019
| Document completely revised.
|
|
|
1
| Stabilizer bar
|
2
| Nuts
|
3
| Bracket
|
4
| Heat shield
|
5
| Nut
|
6
| Bracket
|
7
| Nut
|
Warning
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
| Wear protective gloves, protective clothing and safety glasses, if necessary.
| AS00.00-Z-0002-01A
|
Caution
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
| Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
| AS00.00-Z-0017-01A
|
Topical note
| Notes on self-locking nuts and bolts
|
| AH00.00-N-0001-01A
|
|
| Notes on repair work on suspension components
|
| AH00.00-P-0100-01A
|
| Remove/install
|
|
|
1
| Lift vehicle with vehicle lift.
|
| AR00.60-P-1006A
|
2
| Remove nuts (2) and remove holders (3).
| Nut, stabilizer bar mounting bar to trailing arm
| *BA32.35-P-1001-01A
|
3
| Remove heat shield (4).
| If installed.
|
|
4
| Remove nuts (5) and remove stabilizer (1) with holders (6).
| Nut, stabilizer bracket to frame
| *BA32.35-P-1003-01A
|
5
| Remove nuts (7) and remove holders (6) from stabilizer (1).
| When replacing stabilizer (1).
|
|
|
|
| Nut, stabilizer bar to stabilizer bracket
| *BA32.35-P-1002-01A
|
6
| Check elastomer bearings of stabilizer (1) for wear and damage.
| If problems exist,
|
|
|
|
|
|
|
|
|
| Replace relevant elastomer bearing(s).
|
|
7
| Install in the reverse order.
|
|
|
Stabilizer bar/torsion bar
|
Number
| Designation
|
| Model 460, 461
Model 463
up to model year 2019
|
BA32.35-P-1001-01A
| Nut, stabilizer bar mounting bar to trailing arm
| Nm
| 50
|
Stabilizer bar/torsion bar
|
Number
| Designation
|
| Model 460, 461
Model 463
up to model year 2019
|
BA32.35-P-1002-01A
| Nut, stabilizer bar to stabilizer bracket
| Nm
| 90
|
Stabilizer bar/torsion bar
|
Number
| Designation
|
| Model 460, 461
Model 463
up to model year 2019
|
BA32.35-P-1003-01A
| Nut, stabilizer bracket to frame
| Nm
| 90
|
Documente menționate
- ah0000n000101a Indicaţii pentru şuruburile şi piuliţele autoblocante
- ah0000p010001a Indicaţii privind lucrările de Repararea e la componentele trenului de rulare
- ar0060p1006a Ridicare, coborâre autovehicul cu elevator
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau
incandescente
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele
cu muchii ascuţite ale autovehiculului
