D32.35-1103-06
1 Stabilizer
2 Bolt
3 Nut
4 Rubber bushing
5 Bearing shell
6 Bolt
7 Link rod
8 Bolt
9 Nut
| Remove | ||
1 | Unbolt attachment of bearing shell (5) at axle supporting tube | ||
2 | Secure stabilizer to prevent it from falling | ||
3 | Loosen link rods (7) on longitudinal frame member and remove together with the stabilizer bar (1) | ||
4 | Detach link rods (7) from stabilizer bar (1) | Check rubber mount and replace if necessary | |
Remove rubber mount from link rod and rear axle stabilizer bar | |||
| |||
| Install | ||
5 | Mount link rods (7) on longitudinal frame member | Only fit on screwed connection, do not tighten. | |
6 | Mount link rods (7) on stabilizer bar (1) | Only fit on screwed connection, do not tighten. | |
7 | Attach stabilizer (1) with rubber mount (4) and bearing shell (5) at rear axle | Only fit on screwed connection, do not tighten. | |
8 | Center stabilizer (1) | ||
9 | Tighten screwed connection of connecting rods at longitudinal frame member and at stabilizer | | |
10 | Tighten screwed connection of bearing shell (5) at axle supporting tube | |
Anti-roll bar
Number | Designation | Type 905 | ||
BA32.35-N-1001-03B | Screw, connecting rod to stabilizer and longitudinal frame member (rear axle) | M121.5 | Nm | 68 |
BA32.35-N-1002-03B | Screw, stabilizer clamp to rear axle tube | M8 | Nm | – |
M10 10.9 | Nm | 47 | ||
M121.5 | Nm | - | ||
668 589 00 43 00
Installation tool