ar3220p0300d

Remove, install torsion bar at front axle

Tip ar · temă 32.20 · versiune 0107 · 2010-03-12

Valabil pentru: MODEL 210

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 32 Suspensie › 32.20 Suspensie cu arcuri metalice, bară stabilizatoare, Niveaumat — Seria 210

EinPAS 20 Sistem de rulare › 20.16 Suspensie › 20.16.30 Arc/burduf elastic/amortizor/element de suspensie — Seria 210

AR32.20-P-0300D

Remove, install torsion bar at front axle

10.3.10

MODEL 210

Remove, install torsion bar at front axle

P32.25-0222-09

 	Remove/install
	Replace self-locking bolts.
1	Unscrew bolts (23c).		*BA32.20-P-1002-02D
2	Detach bracket (21b) with molded part (21g).	Bolt (21d)	*BA32.20-P-1001-02D
3	Remove torsion bar (10).	Installation: Center the torsion bar (10).
4	Remove connecting rod (23) (rubber mount) from torsion bar (10).
5	Pull rubber mounts (21a) off torsion bar (10).
		Installation: grease inner side of rubber mount (21a) with lubricant.	*BR00.45-Z-1002-06A
6	Reverse the removal sequence to install.

 Front axle torsion bar

Number	Designation		Model 210 without level control / ADS CODE 217a except model 210.07 with code Z04, Z06 except model 210.08/28	Model 210 with level control / ADS CODE 217a except model 210.07 with code Z04, Z06 except model 210.08/28


BA32.20-P-1001-02D	Self-locking bolt, torsion bar to frame	Nm	20	20
BA32.20-P-1002-02D	Self-locking bolt, torsion bar connecting rod to wishbone	Nm	80	80

Repair materials

Number	Designation	Order number
BR00.45-Z-1002-06A	Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00	A 000 989 01 60