Serii
ro
ar2650b474303a
Checking play between grooved ball bearing and circlip in front section of
transmission housing
Tip ar · temă 26.50 · versiune 0101 · 2020-03-23
Valabil pentru: Transmission 712.622/631 in model 368.0/1 Transmission 712.623/632 in model 368, 382, 384 Transmission 712.623/632 in model 693, 694, 695 Transmission 712.631 in model 384.334, 685.282/284/289/290
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 2 Sistem de rulare › 26 Cutie de viteze mecanică › 26.50 Grup de roţi dinţate, arbori, diferenţial — Seria 368 · Seria 382 · Seria 384 · Seria 685 (modele 282, 284, 289, 290) · Seria 693 · Seria 694 · Seria 695
EinPAS 17 Grup motopropulsor/Punte › 17.20 Cutie de viteze › 17.20.50 Arbore/Roată dinţată/Sincronizare — Seria 368 · Seria 382 · Seria 384 · Seria 685 (modele 282, 284, 289, 290) · Seria 693 · Seria 694 · Seria 695
Valabil și pentru motoare/cutii de viteze: 712 622, 712 623, 712 631, 712 632
AR26.50-B-4743-03A
Checking play between grooved ball bearing and circlip in front section of transmission housing
Transmission
712.622/631 in model 368.0/1
Transmission
712.623/632 in model 368, 382, 384
Transmission
712.623/632 in model 693, 694, 695
Transmission
712.631 in model 384.334, 685.282/284/289/290
Number
Designation
Gearbox 712.62/63/64, 715.054/064
BE26.50-B-1002-01E
Axial play of the radial bearing on the front part of the gearbox
mm
0,00...0,07
1
Using a feeler gage, check the “B” clearance between the snap ring (1) and the radial bearing (2). .
In case the established value is not obtained, a new snap ring must be assembled, with the appropriate thickness.
Snap rings are provided following the thickness below: 4.00; 3.95; 3.90 and 3.85 mm.
A figura representa a árvore primária da caixa de mudanças 715.050
For transmissions 715.060 the gap between the radial bearing and the locking ring is checked with the primary shaft removed.
