ar2645g0002ade

Remove/install hydraulic pump

Tip ar · temă 26.45 · versiune 0100 · 2018-09-10

Valabil pentru: Transmission 715.316/356/366/376/386/536/537/538/539 in model 800 Power take-off 135

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 26 Cutie de viteze mecanică › 26.45 Priză de putere, reductor priză putere — Seria 800

EinPAS 17 Grup motopropulsor/Punte › 17.45 Priză de putere › 17.45.40 Pompă de ulei/Canal de ulei/Filtru de ulei/Răcire ulei — Seria 800

Valabil și pentru motoare/cutii de viteze: 715 316, 715 356, 715 366, 715 376, 715 386, 715 536, 715 537, 715 538, 715 539

AR26.45-G-0002ADE

Remove/install hydraulic pump

28.08.2018

Transmission

715.316/356/366/376/386/536/537/538/539 in model 800

Power take-off 135

Remove/install hydraulic pump

1

Power take-off 1

2

Seal

3

Hydraulic pump 1

4

Hydraulic pump 2

5

Power take-off 2

6

Seal

7

Shim

W26.45-1363-11

Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Remove/install

1

Separate hydraulic lines at hydraulic pump 1 (3) and at hydraulic pump 2 (4).

Collect hydraulic fluid which flows out in a suitable vessel.

2

Remove hydraulic pump 2 (4) and power take-off 2 (5) from power take-off 1 (1).

Collect escaping transmission oil or hydraulic fluid with suitable containers.
Pay attention to shim (7).

Installation: Clean sealing surfaces and replace seals (6).

Nut, hydraulic pump to power take-off

*BA26.45-N-1009-04E

3

Detach hydraulic pump 1 (3) from power take-off 1 (1).

Collect escaping transmission oil or hydraulic fluid with suitable containers.

Installation: Clean sealing surfaces and replace seal (2).

Nut, hydraulic pump to power take-off

*BA26.45-N-1009-04E

4

Install in the reverse order.

5

Check hydraulic fluid level in oil container; correct if necessary.

See operator's manual and maintenance procedures of the body manufacturer.

6

Check transmission oil level, correct, if necessary.

AP26.00-G-2601OH

Power take-off

Number

Designation

Transmission 715 with PTO 135

BA26.45-N-1009-04E

Nut, hydraulic pump to power take-off

Nm

70

Documente menționate