D26.45-0019-11
1 Control cylinder
2 M7 screws
3 Gasket
4 Ring
5 Hydraulic pipe
6 Screw
7 Support
8 PTO switch connector
| Remove and install | ||
1 | Remove the hydraulic pipe (5) from the control cylinder (1) | ||
| |||
2 | Loosen the connector (8) from the PTO switch (arrow) and remove it | ||
3 | Remove the control cylinder (1) | ||
| |||
4 | Install in reverse order | ||
5 | Bleed the PTO hydraulic drive system |
PTO
Número | Denominação | Gearboxes 711.620/622 NA 28-2b (with power takeoff output flange CODE N07) | Gearboxes 711.620/622 NA 28-2c (without power take off output flange CODE N05) | |||
BA26.45-B-1001-01F | Power outlet hydraulic piping support to gearbox | Nm | 38 | 38 | ||
BA26.45-B-1002-01F | Power outlet receiver cylinder | Nm | 13 | 13 | ||