AR26.40-B-2476B | Disassemble/assemble rear section of transmission housing | 12.02.16 |
Manual transmission 712.360, 712.361, 712.362, 712.364, 712.365 with Vehicle 688.232, 688.244, 688.254, 688.255, 688.276, 688.277, 693.028
W26.40-0015-05
1 Gearbox rear case
2 Magnet
3 Countershaft bearing outer race
4 Countershaft bearing outer race
5 Needle bearing
B17 Speed transmitter
S9 Neutral position switch
| Disassemble and assemble | ||
1 | Remove the gearbox rear case (1). | ||
2 | Remove the neutral position switch (S9) | | |
3 | Remove the speed transmitter (B17). | | |
4 | Remove the outside race of the bearings (3, 4) | | |
| |||
Assembling: Utilize a suitable driver. Heat up the gearbox rear case, in the races seat area, to about 80°C. | |||
5 | Remove the needle bearing (5). | | |
| |||
Assembling: Lubricate the bearing, and utilize an appropriate drift. | |||
6 | Install in reverse order. |
Housing
Número | Denominação | Gearbox 712.36 | |||
BA26.40-B-1009-01C | Neutral position switch in the rear housing | Nm | - | ||
BA26.40-B-1010-01C | Vehicle speed sensor | Nm | 50 | ||
000 589 26 33 00
Puller
000 589 30 33 00
Puller
000 589 30 34 00
Puller
000 589 33 33 00
Counter support
000 589 34 33 00
Counter support