ar2640b247502a

Detaching rear part of transmission housing pulling off/pulling on device

Tip ar · temă 26.40 · versiune 0101 · 2020-06-17

Valabil pentru: Transmission 712.622/631 in model 368.0/1 Transmission 712.623/632 in model 368, 382, 384 Transmission 712.623/632 in model 693, 694, 695 Transmission 712.631 in model 384.334

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 26 Cutie de viteze mecanică › 26.40 Carcasă — Seria 368 · Seria 382 · Seria 384 · Seria 693 · Seria 694 · Seria 695

EinPAS 17 Grup motopropulsor/Punte › 17.20 Cutie de viteze › 17.20.30 Carcasă/Capac/Baie de ulei/Suspensie — Seria 368 · Seria 382 · Seria 384 · Seria 693 · Seria 694 · Seria 695

Valabil și pentru motoare/cutii de viteze: 712 622, 712 623, 712 631, 712 632

AR26.40-B-2475-02A

Detaching rear part of transmission housing pulling off/pulling on device

Transmission

712.622/631 in model 368.0/1

Transmission

712.623/632 in model 368, 382, 384

Transmission

712.623/632 in model 693, 694, 695

Transmission

712.631 in model 384.334

Modification notes

23.11.2006

Inclusion of the model 712.62/63

23.11.2006

Change of special tool 715 589 00 43 00 by 715 589 01 43 00

09.01.2020

Change of special tool 715 589 01 43 00 by 055 589 08 43 00. Awaiting inclusion of this new tool in NARS.

Detaching rear part of transmission housing pulling off/pulling on device
Detaching rear part of transmission housing pulling off/pulling on device

715 589 01 63 00

Mounting plate

715 589 10 63 00

Bracket

Detaching rear part of transmission housing pulling off/pulling on device

1

Secure the removal device of the transmission (1) in the areas indicated by the arrows, at the rear part (5X M10) and on the side (4X M16) via rubber buffer holder.



2

Install the countersink (2) on the spindle (3) of the removal device.



3

Tighten the spindle (3) against the main shaft using a conventional tool so that the rear transmission case (1) is ejected from the main shaft.


B26.40-0001-02