Remove/install gear control (GS) control unit · ar2620g2000e · Mercedes-Benz WIS

AR26.20-G-2000E

Remove/install gear control (GS) control unit

17.4.08

TRANSMISSION 715.350 /351 /361 in MODEL 000.001

W26.20-1099-09

1 Gate cylinder housing

2 Sealing ring

3 Sealing ring

4 Gasket

5 Intermediate plate

Y33 Gate 1 solenoid valve (MG1)

Y34 Gate 2 solenoid valve (MG2)

Y125 Countershaft brake solenoid valve

6 Gasket

A16 Gear control (GS II) control unit

Y29 Splitter 1 solenoid valve (MS1)

Y30 Splitter 2 solenoid valve (MS2)

 	Remove/install
1	Remove gate module		AR26.20-G-1005E
2	Detach gear control (GC) control unit (A16) from gate cylinder housing (1)	 Installation: Replace seal (4).
			*BA26.20-N-1001-03KL
3	Remove countershaft brake solenoid valve (Y125)	 Installation: Replace sealing ring (3).	AR26.19-G-0013E
4	Remove splitter 1 solenoid valve (MS1) (Y29) and splitter 2 solenoid valve (MS2) (Y30)	 Installation: Install new sealing rings (3).	AR26.19-G-0007E
5	Remove gate 1 solenoid valve (MG1) (Y33) and gate 2 solenoid valve (MG2) (Y34)	 Installation: Install new sealing rings (3).	AR26.19-G-0009E
6	Detach gear control (GC) control unit (A16) from intermediate plate (5)	 Installation: Install new sealing ring (2) and seal (6).
			*BA26.20-N-1001-03KL
7	Install in the reverse order
8	Teach in gear control (GC) control unit (A16) using Diagnosis Assistance System (DAS)

 Shift gate module

Number	Designation		Transmission 715.350	Transmissions 715.351/361


BA26.20-N-1001-03KL	Bolt, control unit to intermediate plate	Nm	10	10