Removing/installing range group shift cylinder

AR26.18-B-3100TA

12.02.16

Manual transmission 715.527 with Vehicle 958.4 with CODE GS2 (Gear control)

W26.18-0006-11

1 O-Ring (5 x 3)

2 Compressed air pipe

3 Electro-pneumatic shifting unit of the

4 Electric connector

5 O-Ring (89.5 x 3)

6 Sealing ring

7 O-Ring (96 x 1.5)

	Remove and install
1	Remove the retarder	 Only vehicles with Code (BA9) Secondary Retarder Voith R115.
		Models 958	AR43.30-B-0002TA
2	Remove the electric connector (4)
3	Remove the compressed air pipe (2)	With compressed air connection system "VOSS 230".	AR42.10-B-0900TA
		With compressed air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-B-0900TC
			*BA26.18-B-1002-01B
	Indications on compressed air connection systems		AH00.18-B-0001-01A
4	Remove the electro-pneumatic shifting unit of the GP (3)	Installing: Replace the O-Rings (1, 5 and 7) and apply synthetic grease.	*BR00.45-B-1021-06A
			*BA26.18-B-1006-01B
	Sealing on the command cylinder of the range group or on the modified range group module		BT26.18-B-0001-01A
5	Remove the sealing ring (6) of the command cylinder	Installing:Apply synthetic grease in the cavity between the two sealing lips.	*BR00.45-B-1021-06A
6	Install in reverse order

Transmission pneumatic system

Número	Denominação			Gearboxes 715.5 with CODE GS2


BA26.18-B-1002-01B	Pneumatic piping connection nut		Nm	40
BA26.18-B-1006-01B	Bolts of the gear command cylinder in the gearbox	M10	Nm	60
		M12	Nm	70

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1021-06A	Synthetic grease	A 001 989 32 51