ar2519s0152p

Remove/install switch for clutch pedal front end position

Tip ar · temă 25.19 · versiune 0100 · 2017-09-11

Valabil pentru: Model 470 with transmission 700.78 Model 471 with transmission 700.78

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 25 Ambreiaj › 25.19 Echipament electric ambreiaj — Seria 470 · Seria 471

EinPAS 17 Grup motopropulsor/Punte › 17.15 Ambreiaj › 17.15.12 Senzor/Comutator/Cablaj — Seria 470 · Seria 471

Valabil și pentru motoare/cutii de viteze: 700 78*

AR25.19-S-0152P

Remove/install switch for clutch pedal front end position

09.06.2017

Model

470 with transmission 700.78

Model

471 with transmission 700.78

Remove/install switch for clutch pedal front end position

S25.19-0001-08

1

Switch for clutch pedal end position at front

3

Electrical connector

2

Bracket

Y

Dimension

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Remove driver kneebag

AR91.60-S-0200P

2

Turn switch for clutch pedal end position at front (1) 45° in clockwise direction and pull out of holder (2)

3

Release and disconnect electrical connector (3) and remove switch for clutch pedal end position at front (1)

Install

4

Plug electrical connector (3) into switch for clutch pedal end position at front (1) until it locks in to place

5

Push clutch pedal by hand into front end position

6

Insert switch for clutch pedal end position at front (1) into holder (2), adjust dimension (Y) and turn switch for clutch pedal end position at front (1) 45° in counterclockwise direction

Distance from housing of switch for clutch pedal front end position to contact surface on clutch pedal

*BE25.20-N-1001-01P

7

Release clutch pedal

8

Check if the bolt of the clutch master cylinder threaded rod can be easily moved by hand

AR25.20-S-0005-01P

Bolt seated firmly in the clutch master cylinder threaded rod.

Adjust switch for clutch pedal end position at rear.


AR25.19-S-0153P

Bolt still firmly seated on clutch master cylinder threaded rod.

Replace bolt of clutch master cylinder threaded rod.


AR25.20-S-0005-01P

9

Install driver kneebag

AR91.60-S-0200P

Clutch operating system

Number

Designation

Model 470, 471 with transmission 700.78

BE25.20-N-1001-01P

Distance from housing of switch for clutch pedal front end position to contact surface on clutch pedal

Dimension "Y"

mm

0,1...1,0

For picture, see

-

Documente menționate