ar2210i1200c

Remove/install engine support

Tip ar · temă 22.10 · versiune 0101 · 2007-04-16

Valabil pentru: ENGINE 904.941 in MODEL 684.482

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 22 Suspensie agregat › 22.10 Lagăr agregat, suport agregat — Seria 684 (modele 482) · Seria 904 (modele 941)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.20 Suspensie motor — Seria 684 (modele 482) · Seria 904 (modele 941)

AR22.10-I-1200C

Remove/install engine support

22.3.07

ENGINE 904.941 in MODEL 684.482

Remove/install engine support

N22.10-2032-06

1 Engine support

2 Cross strut

3 Oil pan

4 Bolt

5 Bolt

6 Vehicle frame

7 Carrier console

8 Engine mount

 	Remove/install
 Installation	Replace self-locking nuts and bolts.
1	Secure vehicle against rolling
2	Support engine using a suitable assembly lifter	 Additionally use suitable wooden or rubber supports, otherwise the oil pan can be damaged.
		 Ensure secure status of the assembly lifter and freedom of tension of the engine when supporting.
3	Remove lateral strut (2)		*BA22.10-N-1002-01T
4	Unscrew bolt (4)		*BA22.10-N-1001-01T
5	Remove bolts (5)		*BA22.10-N-1003-01T
6	Remove engine mounts (8)	 Installation: Observe correct seating of the engine mount (8). Check engine mount (8) for wear; replace if necessary.
7	Remove engine supports (1)	 Installation: Ensure engine support (1) is seated correctly.
8	Install in the reverse order

 Engine mounts, engine supports

Number	Designation			Engine 904.941


BA22.10-N-1001-01T	Bolt, carrier console to engine mount		Nm	270
BA22.10-N-1002-01T	Bolt, engine mount and cross strut to engine support		Nm	45
BA22.10-N-1003-01T	Nut, engine support to longitudinal frame member		Nm	45