ar2040t0300aa

Removing/installing the hydrostatic fan drive - filter bowl

Tip ar · temă 20.40 · versiune 0100 · 2005-07-12

Valabil pentru: ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 20 Răcire motor › 20.40 Ventilator, cuplaj ventilator — Seria 671 (modele 015, 020, 021, 030, 042, 332, 333)

EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.45 Ventilator/Cuplaj ventilator/Acționare ventilator — Seria 671 (modele 015, 020, 021, 030, 042, 332, 333)

Valabil și pentru motoare/cutii de viteze: 457 942

AR20.40-T-0300AA

Removing/installing the hydrostatic fan drive - filter bowl

29.10.03

ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333

Removing/installing the hydrostatic fan drive - filter bowl

T20.40-0037-11

Illustrated on model 671.042

1 Bolt

2 Hydraulic line

3 Filter housing

4 Bracket

5 Bolt

Removing/installing

Danger!

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning caused by swallowing hydraulic fluid.

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

1

Drain hydraulic fluid and unscrew filter cartridge

Hydrostatic fan drive - oil and filter change

AP20.40-T-2001AA

2

Remove bolts (1)

3

Remove hydraulic lines (2) from filter bowl (3)

Collect hydraulic fluid in a suitable container. Observe the disposal regulations.

4

Unscrew bolts (5).

5

Remove filter bowl (3) from bracket (4)

6

Install in reverse order

Documente menționate