ar2020t745002a
Remove/install coolant pipe between coolant pump and oil-water heat exchanger
Tip ar · temă 20.20 · versiune 0102 · 2005-07-12
Valabil pentru: ENGINE 447, 489
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 1 Motor › 20 Răcire motor › 20.20 Radiator, furtunuri agent de răcire — Seria 447
EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.13 Conductă/Furtun/Supapă — Seria 447
Valabil și pentru motoare/cutii de viteze: 489 ***
AR20.20-T-7450-02A
| Remove/install coolant pipe between coolant pump and oil-water heat exchanger
|
|
|
Coolant pump, coolant thermostat
Number
| Designation
| Engine 447, 489
|
|
|
|
|
|
|
|
|
|
|
BA20.10-N-1006-01H
| Bolt of coolant pipe to coolant pump
| Nm
| 25
|
1 Unscrew bolts (1) of coolant pipe (2) at coolant pump
Installation: Pay attention to tightening torque.
2 Detach securing clamps (3) of bracket of coolant pipe to engine block.
3 Detach hose branch (4) at coolant pipe (2).
4 Detach hose (5) at oil-water heat exchanger (6).
5 Take off coolant pipe (2).
6 Install in the reverse order.
