ar2000s114206e

Bleed cooling system

Tip ar · temă 20.00 · versiune 0105 · 2020-06-09

Valabil pentru: Model 447 with engine 274, 622, 651 Model 448 with engine 274

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 20 Răcire motor › 20.00 Generalităţi — Seria 447 · Seria 448 · Seria 622 · Seria 651

EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.5 Circuit de lichid de răcire complet — Seria 447 · Seria 448 · Seria 622 · Seria 651

Valabil și pentru motoare/cutii de viteze: 274 ***

AR20.00-S-1142-06E	Bleed cooling system
 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A

Model	447 with engine 274, 622, 651
Model	448 with engine 274

1	Switch heater to maximum heating output and allow engine to warm up at average engine speed.

2	Continuously refill coolant until coolant level reaches marking in coolant expansion reservoir.

3	Once the coolant temperature reaches approx. 60 to 70 °C, close coolant expansion reservoir with cap.

Documente menționate

as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.