T18.10-0005-08
1 Bolt
2 Bolt
3 Intake manifold (oil pump secondary)
4 Bolt
5 Nut
6 Intake manifold (oil pump primary)
7 Oil pump outlet pipe
8 Bolt
9 Oil pump
10 Connecting shaft
| Remove/install | ||
1 | Remove oil pressure relief valve | ||
2 | Remove bolts (1, 2) and intake manifold (3) | Installation: Clean sealing surfaces and install new gasket. | |
| |||
| |||
3 | Remove bolts (4) and nuts (5) and intake manifold (6) | Installation: Clean sealing surfaces and install new gasket. | |
| |||
| |||
4 | Remove oil pump (7) outlet pipe | | |
| |||
5 | Remove bolts (8) and oil pumps (9) with connecting shaft (10) | Installation: Clean fitting surfaces. | |
| |||
| |||
6 | Separate oil pump (9) from each other and remove connecting shaft (10) | The connecting shaft (10) connects both oil pumps (9) together by means of two sliding pieces. | |
7 | Install in the reverse order |
Oil pump
Number | Designation | Engine | ||
BA18.10-N-1002-01Q | Bolt, oil pump to crankcase | Nm | 35 | |
BA18.10-N-1003-01Q | Bolt, intake manifold to oil pump | Nm | 35 | |
Torque wrench
000 589 64 21 00