ar1530t7100cb

Remove/install starter

Tip ar · temă 15.30 · versiune 0102 · 2012-02-16

Valabil pentru: ENGINE 457.944 in model NMB613.367

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 15 Instalaţie electrică motor › 15.30 Demaror — Seria 613 (modele 367)

EinPAS 15 Motor › 15.35 Demaror › 15.35.20 Demaror — Seria 613 (modele 367)

Valabil și pentru motoare/cutii de viteze: 457 944

AR15.30-T-7100CB

Remove/install starter

15.2.12

ENGINE 457.944 in model NMB613.367

Remove/install starter

A15.30-0001-11

2 Nut

3 Electrical wiring

4 Nuts

M1 Starter

Remove/install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect electric cables at battery.

AR54.18-T-0002CB

2

Remove lower engine compartment paneling

AR61.20-T-1105CA

3

Unscrew nuts (4) and remove electrical line (3) from starter (M1)

*BA15.30-N-1002-01J

*BA15.30-N-1003-01J

4

Unscrew nuts (2) and remove starter (M1) from timing case

*BA15.30-N-1001-01J

5

Inspect starter pinion for wear

In case of wear, replace the starter (M1).

6

Inspect ring gear of flywheel for wear

In case of wear, replace flywheel ring gear.

7

Install in the reverse order

Starter

Number

Designation

Engine 457.9

BA15.30-N-1001-01J

Nut, starter to timing case

Nm

80

BA15.30-N-1002-01J

Nut, charge cable of circuit 30 to starter

Nm

30

BA15.30-N-1003-01J

Nut, charge cable of circuit 31 to starter

Nm

25

Documente menționate