ar1530t7100ba

Remove/install starter

Tip ar · temă 15.30 · versiune 0103 · 2012-02-16

Valabil pentru: ENGINE 457.944 in MODEL 613.358 /388

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 15 Instalaţie electrică motor › 15.30 Demaror — Seria 613 (modele 358, 388)

EinPAS 15 Motor › 15.35 Demaror › 15.35.20 Demaror — Seria 613 (modele 358, 388)

Valabil și pentru motoare/cutii de viteze: 457 944

AR15.30-T-7100BA

Remove/install starter

15.2.12

ENGINE 457.944 in MODEL 613.358 /388

Remove/install starter

A15.30-0001-11

2 Nut

3 Electrical wiring

4 Nuts

M1 Starter

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Remove batteries

Remove batteries and battery tray.

AR54.10-T-0005BA

2

Remove air filter

AR09.10-T-1150C

3

Remove partition wall between air filter and engine compartment

4

Detach electric cables (3) from starter (M1)

Nut, charge cable of circuit 30 to starter

*BA15.30-N-1002-01J

Nut, charge cable of circuit 31 to starter

*BA15.30-N-1003-01J

5

Detach starter (M1) from timing case and take off

Nut, starter to timing case

*BA15.30-N-1001-01J

6

Inspect starter pinion for wear

In case of wear, replace starter (M1).

7

Inspect ring gear of flywheel for wear

In case of wear, replace flywheel ring gear.

8

Install in the reverse order

Starter

Number

Designation

Engine 457.9

BA15.30-N-1001-01J

Nut, starter to timing case

Nm

80

BA15.30-N-1002-01J

Nut, charge cable of circuit 30 to starter

Nm

30

BA15.30-N-1003-01J

Nut, charge cable of circuit 31 to starter

Nm

25

Documente menționate