P15.12-2229-09
2 | Vent line | T1/2 | Cylinder 2 ignition coil | |
3 | Bracket | T1/3 | Cylinder 3 ignition coil | |
4 | Bolts | T1/4 | Cylinder 4 ignition coil | |
T1/1 | Cylinder 1 ignition coil |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on avoiding damage to ignition system | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on safety-relevant components | |||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
2 | Remove upper engine cover. | ||
3 | Unclip bleed line (2) from the bracket (3). | ||
4 | Release and disconnect electrical connectors of the ignition coils (T1/1, T1/2, T1/3, T1/4). | ||
5 | Remove screws/bolts (4). | Screw/bolt, ignition coil to cylinder head cover | |
6 | Remove ignition system heat shield from cylinder head. | Engine 264 in model 205, 253 | |
Screw, ignition system heat shield to cylinder head | |||
7 | Remove ignition coils (T1/1, T1/2, T1/3, T1/4). | Installation: | |
Installation: Approx. Fill 1 g of spark plug connector grease into the spark plug connector. | |||
Spark plug connector grease | |||
| Check | ||
8 | Check ignition coils (T1/1, T1/2, T1/3, T1/4) for external damage. | If damage is present, | |
| |||
replace damaged ignition coil (T1/1, T1/2, T1/3, T1/4). | |||
9 | Install in the reverse order | ||
Concluding tasks | |||
10 | Connect vehicle diagnosis system, read out fault memory and clear if necessary. | ||
| |||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
11 | Conduct engine test run while checking for proper operation of the engine. |
Documente menționate
- ad0000p200004b
- ah0000z001901a Indicaţii referitoare la componente relevante din punct de vedere al siguranţei
- ah1510p000201v Indicaţii pentru evitarea producerii de avarii la instalaţia de aprindere
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar0110p2405mri
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.